Checks And Maintenance - ZHT AMPHIBIO Handbuch

Options
The suction chamber can be removed from the floating strainer and used as a traditional sucti-
on strainer by removing the two hex screws (11).
WARNING: Rubber return valve operates only in horizontal position!
If you use chamber in vertical position, the return valve will not work.

Checks and maintenance

Clean the strainer after every use. Clean the plastic inlet grid (4) from solid particles. Check the
suction chamber (1) and connection for any loose debris (3). Periodically check the functio-
nality of the return valve (5). Remove all dirt from connections. Avoid any damage to rubber
return valve.
Manufacturer: (guarantee service)
ZHT Group s.r.o.
753 61 Hranice VII – Slavíč 16
Tel.: 581 616 365
Fax.: 581 616 313
www.zht.cz
Supplier:
www.zht.cz 17