Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
When you want to control your washing machine remotely, you need to activate the Remote Control function
by pressing the Remote Control button while the programme knob is in the Download Programme/Remote
Control position button on the control panel of your washing machine. When your product is accessed, you will
see a screen similar to the below.
When the Remote Control is on, you can only manage, turn-off and status follow-up operations through your
washing machine. And all functions except child lock can be managed through the application.
You can follow whether the Remote Control function is On or Off through the function indicator on the button.
If the Remote Control function is Off, all the operations are handled on the washing machine and only status
follow-up is allowed on the application.
In the event that Remote Start function cannot be turned on, appliance will make a warning sound when
you press the button. This might happen in cases such as when the appliance is turned on and there is no
paired smart device via bluetooth. Bluetooth settings being Off or the washing machine's door being open are
examples for such cases.
Once you activate this function on the washing machine, it will remain enabled apart from certain conditions
and allow you to control your washing mahine remotely via bluetooth.
In certain cases, it deactivates itself for safety reasons:
•
When your washing machine undergoes a power interruption.
•
When programme knob is turned and a different programme selected or appliance is turned off.
4.3.15.4 Troubleshooting
Do the following if you have a problem with controlling or connection. Observe whether the problem persists or
not after the action you have performed. Do the following if the problem is not resolved.
•
Check whether your smart device is connected to the relevant home network.
•
Restart the product application.
•
Turn bluetooth off and then on via user control panel.
•
If the connection cannot be established with the above processes, repeat the initial set-up settings on the
washing machine.
If the problem persists, consult an Authorised Service Agent.
4.3.15.5 Drum Illumination
Drum illumination lamp of your machine will light up during programme selection. The lamp will go off 10
minutes after the programme starts. If no programme is started or no key is pressed within 10 minutes during
programme selection process, the drum illumination lamp will go off.
Drum illumination lamp of your machine will light up after the programme is completed. It will go off when
you press the On/Off button. The drum illumination lamp will go off if you do not press any button within 10
minutes after the programme has ended.
28 / EN
Washing Machine / User's Manual
Werbung
Inhaltsverzeichnis
