Troubleshooting; Technical Data - AEG CTV 4910 Bedienungsanleitung

Troubleshooting

Before sending the machine to the Customer Services, use the following table to check whether you can rectify the
fault yourself.
Possible cause
Fault
Screen does not No power supply
light up
no power supply/ mains
switch switched off
No image displayed The storage medium is not
on screen compatible
The child protection system is
activated
No response when Power supply problem or
pressing button static charging of appliance
No sound Volume turned to low
Headphones not correctly
inserted
The remote control Wrong direction
does not work
Too far away
Batterie empty
No DVB-T reception The station being received is
too weak for reception via the
telescopic aerial.
No DVB-T reception in your
region.
The station being received is
too weak.
Mosaic similar The station being received is
picture too weak.

Technical Data

Model: .................................................................... CTV 4910 DVB-T
Net weight: ............................................................................0,50 kg
Mains Adapter
Protection class: .............................................................................. ΙΙ
Input: ..................................................... AC 100-240 V, 50/60 Hz
Output: ................................................................... DC 9 V, 150 mA
Polarity: .................................................................................
This device has been tested according to all relevant cur-
rent CE guidelines, such as electromagnetic compatibility
and low voltage directives, and has been constructed in
accordance with the latest safety regulations.
Subject to technical changes without prior notice!
Solution
Put the mains plug in correctly, if necessary, check the socket
is working with another appliance.
Switch the player on by the mains switch (Fig. 1/2).
Use only compatible media.
Deactivate the child protection.
Switch off the main switch and pull out the mains plug.
Insert the mains plug into the socket and switch the player
on again.
Increase the volume by pressing the
the device.
Check that the headphones are correctly positioned.
The remote control is not pointing at the device.
Make sure that the remote control is not further than 5 m
away from the player.
Replace the batteries in the remote control.
Realign the aerial or connect your house or room aerial.
Realign the aerial.
Realign the aerial.
English
47
button (Fig. 1/12) on