Haws 30-OTS222 Bedienungsanleitung Seite 41

OPERATION
1. To switch the appliance on, press the on/off button (u) on the handle. Both the LED lights on the suction
head and the pilot lights on the handheld vacuum cleaner will light on in blue.
2. You can choose the suction power by pressing the high suction power button (v) or low suction power button
(w) on the handle.
3. AnimalPro brush and LED lights on the suction head will be working or stop working at the same time
controlled by the on/off button (x) on the handle. Use the brush to clean the carpet or floor.
4. You can also push up the bending/upright lock (t) on the handle to fold the appliance inwards for easy
cleaning under the beds, desks and other similar places.
5. After use, switch off the appliance and push up the bending/upright lock on the handle to fold the appliance
for easy parking.
Note: Please charge the appliance while the pilot lights of charging only show one bar of power left or you feel
the suction power is becoming weaker and weaker. Do not let the batteries drain the last drop before charging.
To use the handheld vacuum cleaner separately
1. Press the release button to uncouple the handheld vacuum cleaner from the main body.
2. Take off the nozzle and the small square brush from the back of charging base.
3. Install the nozzle to clean corners and crevices. Install the brush to clean the upholsteries, such as sofa.
4. Press the center of on/off button for handheld vacuum cleaner to make the machine work. Press the center
of the button again to switch off the machine.
5. Put the handheld vacuum cleaner back into its place on the main body after use.
TIPS

This appliance has been designed exclusively to vacuum clean floors, carpets and rugs, furniture and fabrics.
Do not use it for any other purpose.

Its AnimalPro brush can remove lint, hair and pet hair embedded in carpets and rugs.
- 40 -