Repair And Maintenance; Tire - SXT SCOTEX Spike Handbuch

3.1 ASSEMBLE THE HANDLE BAR
Align the handlebar vertically
and horizontally with the clamps
(A & B). Install the 4 bolts (C) and
lock nuts (D) and hand tighten
them.
3.2 INFLATE TIRES
REAR TIRE PSI: 30 MAX
(max 2,1 bar)

Repair and Maintenance

Tighten the screws evenly with a
5 mm hexagon wrench (E) and 10
mm open-end wrench (F).
The tires are infl ated to the maximum air pressure
before shipping, but some air pressure may be lost
between the date of manufacture and your date of
purchase.
Use a hand pump with a Schrader valve and a pres-
sure gauge to infl ate the tires to the recommended
pressure indicated on the tire. It is not recommended
to use pressure systems like those found at gas sta-
tions, as these are designed to infl ate car tires, which
have a much higher air volume.
29
3. before riding, check that the
handlebar is tight by applying
pressure, the handlebar should
not move backwards or for-
wards.