DE
EN
DE
EN
weiß
DE
EN
Technische Daten
Netzgerät (Art.Nr. 886535)
Hinweis.1
Ausgang
Gleichspannung:
Nennstrom:
Nennstrombereich:
Nennleistung:
Spannungsbereich:
Spannungstoleranz
Hinweis.2
Eingang
Spannungsbereich:
Hinweis.3
Frequenzbereich:
Effizienz (typ.):
Wechselstrom (typ.):
Einschaltstrom (typ.):
Schutz
Überlast:
Überspannung:
Übertemperatur:
Umgebung
Betriebstemperatur:
Luftfeuchtigkeit Betrieb:
Lagertemp., Feuchtigkeit:
Temperaturkoeffizient:
Vibration:
Sicherheit &
Sicherheitsstandards:
EMV
Hinweis.4
Spannungsfestigkeit:
Isolationswiderstand:
EMVEmission,
Übereinstimmung mit:
EMVImmunität,
Übereinstimmung mit:
Andere
Mittlere Betriebsdauer
zwischen Ausfällen:
Abmessungen (B x H x T):
Gewicht:
Überwachungsmodul (Art.Nr. 886636)
Eingangsspannung:
Ausgang:
Tiefentladeschutz:
Abmessungen (B x H x T):
Gewicht:
Akku (Art.Nr. 886737)
Hinweis.5
Nennspannung:
Nennkapazität:
Max. Entladestrom für 5 Sek.:
Betriebstemperatur:
Gehäusematerial:
Abmessungen (B x H x T):
Gewicht:
HINWEIS
1. Alle nicht genannten Parameter werden bei 230 VAC Eingang, Nennlast und 25 °C
Umgebungstemperatur gemessen.
2. Toleranz: Beinhaltet die Einstellungstolleranz, Linienregelung und Lastregelung.
3. Bei niedriger Eingangsspannung kann eine Leistungsreduzierung erforderlich
sein.
4. Die Stromversorgung wird als eine Komponente betrachtet, die in eine
Endausrüstung eingebaut wird. Die Konformität des fertigen Geräts muss erneut
geprüft werden, um sicherzustellen, dass es den EMVRichtlinien entspricht.
5. Werte für 1 Akku. Im Lieferumfang der GAT SP 074 2A UPS sind 2 Akkus
enthalten.
VB_GAT-SP074-2A-UPS--DE+EN_10
Gültig ab 13. September 2018
Technische Änderungen vorbehalten!
Seite 2
24 V
5 A
0 ~ 5 A
120 W
24 ~ 28 V
±1,0%
88 ~ 264 VAC
124 ~ 370 VDC
47 ~ 63 Hz
91%
1,4 A / 115 VAC
0,7 A / 230 VAC
35 A / 115 VAC
70 A / 230 VAC
110 ~ 150% Nennleistung
29 ~ 33 V
95 °C ± 5 °C (TSW: Erkennung auf
Kühlkörper des Netzschalters)
25 ~ +70 °C
20 ~ 95% RH nicht kondensierend
40 ~ +85 °C, 1095% RH
±0,03%/ °C (0 ~ 50 °C )
Komponente: 10 ~ 500 Hz, 2G
10 min./1 Zyklus, 60 min. jeweils
entlang X, Y, ZAchsen; Montage:
Übereinstimmung mit IEC6006826
UL508, TUV EN609501 genehmigt
I/PO/P: 3 KVAC, I/PFG: 1,5 KVAC,
O/PFG: 0,5 KVAC, 0/PDC OK: 0,5 KVAC
I/P0/P, I/PFG, 0/PFG: >1 QOM
Ohms / 500 VDC / 25°C/ 70% RH
EN55032:2015+AC:2016, EN61000
32:2014, EN6100033:2013
EN612043, EN6100042:2009, 3:
2006+A1:2008+A2:2010, 4:2012,
5:2014, 6:2014, 8:2010, 11:2004,
Schwerindustrie, Kriterium A, SEMI F47,
GL genehmigt
289,9K Std. Min.
MILHDBK217F (25 °C)
40 x 125,2 x 113,5 mm
0,67 kg
DC 27,6 V
DC 27,3 V / max. 20 A
bei 19 V
ca. 60 x 130 x 98 mm
ca. 0,20 kg
DC 12 V
7,2 Ah
135 A
Ladung/Lagerung: 15 ~ +40 °C
Entladung: 15 ~ +50 °C
ABS
151 x 102 x 65 mm
2,4 kg
GANTNER Electronic GmbH
Montafonerstr. 8 • 6780 Schruns/Austria
T +43 (0)5556 73784 • info@gantner.com • www.gantner.com
Power Supply Module (Part No. 886535)
Output
DC voltage:
Rated current:
Current range:
Rated power:
Voltage adj. range:
Voltage tolerance:
Note.2
Input
Voltage range:
Note.3
Frequency range:
Efficiency (typ.):
AC current (typ.):
Inrush current (typ.):
Protection
Overload:
Over voltage:
Over temperature:
Environment
Operating temperature:
Operating humidity:
Storage temp., humidity: 40 ~ +85 °C, 1095% RH
Temp. coefficient:
Vibration:
Safety &
Safety standards:
EMC
Note.4
Withstand voltage:
Isolation resistance:
EMC emission,
compliance with:
EMC immunity,
compliance with:
Other
MTBF
Dimensions (W x H x D): 40 x 125.2 x 113.5 mm
Weight:
Monitoring Module (Part No. 886636)
Input voltage:
Output:
Full discharge protection:
Dimensions (W x H x D):
Weight:
Battery (Part No. 886737)
Note.5
Nominal voltage:
Nominal capacity:
Max. discharge current for 5 secs.:
Operating temperature:
Housing material:
Dimensions (W*H*D):
Weight:
NOTE
1. All parameters not specially mentioned are measured at 230 VAC input, rated
load, and 25 °C ambient temperature.
2. Tolerance: includes setup tolerance, line regulation, and load regulation.
3. Derating may be needed under low input voltage.
4. The power supply is considered a component that will be installed into a final
equipment. The final equipment must be reconfirmed to ensure it still meets
EMC directives.
5. Values for 1 battery. 2 batteries included with the GAT SP 074 2A UPS.
DE
DE
DE
Technical Data
Note.1
24 V
5 A
0 ~ 5 A
120 W
24 ~ 28 V
±1.0%
88 ~ 264 VAC
124 ~ 370 VDC
47 ~ 63 Hz
91%
1.4 A / 115 VAC
0.7 A / 230 VAC
35 A / 115 VAC
70 A / 230 VAC
110 ~ 150% rated output power
29 ~ 33 V
95 °C ± 5 °C (TSW: detect on heatsink
of power switch)
25 ~ +70 °C
20 ~ 95% RH noncondensing
±0.03%/ °C (0 ~ 50 °C )
Component: 10 ~ 500 Hz, 2G 10 min./1
cycle, 60 min. each along X, Y, Z axes;
Mounting: Compliance to IEC6006826
UL508, TUV EN609501 approved
I/PO/P: 3 KVAC, I/PFG: 1.5 KVAC,
O/PFG: 0.5 KVAC, 0/PDC OK: 0.5 KVAC
I/P0/P, I/PFG, 0/PFG: >1 QOM
Ohms / 500 VDC / 25°C/ 70% RH
EN55032:2015+AC:2016, EN610003
2:2014, EN6100033:2013
EN612043, EN6100042:2009, 3:
2006+A1:2008+A2:2010, 4:2012,
5:2014, 6:2014, 8:2010, 11:2004,
heavy industry, criteria A, SEMI F47,
GL approved
289.9K hrs. min.
MILHDBK217F (25 °C)
0.67 kg
DC 27.6 V
DC 27.3 V / max. 20 A
at 19 V
approx. 60 x 130 x 98 mm
approx. 0.20 kg
DC 12 V
7.2 Ah
135 A
Charge/storage: 15 ~ +40 °C
Discharge: 15 ~ +50 °C
ABS
151 x 102 x 65 mm
2.4 kg
VB_GAT-SP074-2A-UPS--DE+EN_10
Valid as of 13
September, 2018
th
Technical data subject to modification without notice!
EN
EN
EN
Page 2