Operating Your New Appliance - Sage the Bit More BTA720 Kurzanleitung

OPERATING YOUR NEW APPLIANCE

1. Insert the power plug into a 220-240V
power outlet.
NOTE
When using the toaster for the first time, we
suggest toasting on the maximum setting
without bread. The toaster may emit a thin
smoke or distinct odour on initial use. This is
normal and not detrimental to the performance
of the toaster.
2. Place bread, bagels, English muffins etc
into each of the toasting slots.
3. There are 12 browning settings ranging
from '1' (lightest) to '5' (darkest).
4. To start the toasting process, press down
the lever until it locks into place.
5. Once the toasting cycle is complete the
toast ready alert will sound.
WARNING
Do not leave the toaster
unattended when in use as toast
may jam.
In the unlikely event that bread,
bagels, English muffins or toaster
pastries become jammed in the
toasting slots, all the buttons
and the LED toasting progress
indicator will flash and the
elements will turn off. Remove
the power plug from the power
outlet and allow the toaster to
cool completely before carefully
easing the bread out of the slots.
Take care not to damage the
heating elements. Do not use
metal utensils.
A BIT MORE BUTTON
™
If your toast comes up too light, one press of this
button adds a little extra toasting time. This feature
can be selected before, during or after the toasting
cycle and can be used with the CRUMPET/FRUIT
LOAF and FROZEN functions.
To use this feature during the toasting cycle:
Press the A BIT MORE
will automatically increase.
To use this feature before or after the
toasting cycle:
Press the A BIT MORE
lever until it locks into place. The LED toasting
progress indicator will automatically align with the
lowest browning setting.
CRUMPET/FRUIT LOAF BUTTON
To toast crumpets:
1. Place the crumpet into the toasting slots
with the inside of the crumpet facing
inwards as per the crumpet markings
above the middle heating elements
of the toaster.
2. Select the desired browning setting by
adjusting the browning control slide on the
front of the toaster.
3. To select the CRUMPET setting, press the
CRUMPET button and press down the
lever until it locks into place.
NOTE
It is normal for the outside heating elements
to appear off or on a lower power during the
Crumpet setting. This ensures the inside
of your crumpet toasts without burning the
outside.
4. After the cycle has finished, press the
CRUMPET button to deselect the setting if
toasting other types of bread.
button. The toasting time
™
button. Press down the
™
EN
7