AVM FRITZ!Repeater 6000 Kurzanleitung Seite 8

Setting Up the Wi-Fi Connection
Action
1 Connect the FRITZ!Repeater to an outlet close to the FRITZ!Box.
2 Wait until the Connect LED starts flashing slowly.
Start the connection to the FRITZ!Repeater: Press the Connect
3
button. The Connect LED flashes quickly.
Start the connection to your FRITZ!Box:
• FRITZ!Box with Connect/WPS, Connect or WPS button:
Press button briefly. The WLAN or Connect LED flashes.
4
• On a FRITZ!Box with WLAN/WPS or WLAN button: Press the
button for about 6 seconds until WLAN starts flashing.
• On another wireless router, press the button that starts WPS.
As soon as the Connect LED on the FRITZ!Repeater lights up
permanently, the connection has been established.
5
If the Connect LED on the FRITZ!Repeater starts flashing slow-
ly again, repeat steps 3 and 4 of these instructions.
When the wireless connection has been established, move the FRITZ!Repeater
to the desired location.
If the Wi-Fi connection cannot be established at the touch of a button, alterna-
tiveinstructions are presented in the PDF manual at en/avm.de/service.
8
Continue reading on pageSeite 10.
Illustration
Connect
Connect
Connect/ WPS
within
2 minutes
Connect