Safety Information - Hellma Analytics TRAYCELL 2.0 Schnellstartanleitung

SAFETY INFORMATION

The TrayCell is solely intended for use in spectrophotometers,
e.g. for determining the concentration of analytes in liquids.
The light path of the spectrophotometer is diverted within the TrayCell
such that the beam emanating from the light source is able to es-
cape upwards if the mirrored cap is not positioned on the TrayCell.
Before each measurement, ensure that the mirrored cap is in
place on the TrayCell.
The TrayCell must not be stored at temperatures below 4°C
or above 50°C.
There is a risk of corrosion if aggressive cleaning products and
disinfectants are used.
Do not use corrosive cleaning agents, aggressive solvents or
abrasive polishes.
The TrayCell consists of quartz glass and metal components, and
must therefore be handled with care. After use, return the TrayCell
to the storage box and ensure that this is closed. The TrayCell can
easily tip over in an upright position, which can result in damage.
You should therefore always place the TrayCell on a lint-free surface
or in the storage box.