Appliance Test - NOVARDEN NSH35s Installations- Und Benutzerhandbuch

Appliance test

Check before use
You must check the appliance installation and hydraulic connections
referring to the installation diagrams. (See the "heat pump installation"
section on page 8). The wiring and grounding must also be checked.
(See the "power cable connection" section on page 12).
Ensure that the appliance's main switch is on OFF and check the
temperature setting.
Check the ventilation device and outlets operate correctly and are
not obstructed.
Complete a airtightness check in a ventilated space. This control
must not be carried out in a closed space.
If you suspect a leak, stop using the heat pump and contact
NOVARDEN's Customer Services.
Trial
It is normal to see condensate draining from the bottom of the
appliance. This is from the condensation from the water vapour in
the air when it goes into the exchanger. You must make sure water
can easily flow from of the pump.
15
EN EN