Important Safety Notes - S&P HCM-150N Bedienungsanleitung

ENGLISH
HCM WALL / PANEL MOUNTED AXIAL FANS
The HCM range of wall / panel mounted axial fans have been manufactured to the rigorous
standards of production and quality control in accordance with the International Quality Stan-
dards ISO 9001. All components have been checked and tested at the end of the manufactu-
ring process. All appliances are supplied in perfect condition and operation.
However if found to be defective the unit should be returned to the supplier in accordance with
the terms of the S&P guarantee.
We recommend that you check the following when receiving this product:
1. That it is the correct size and model type.
2. That the details on the rating label are those required: voltage, frequency.

IMPORTANT SAFETY NOTES

– All installation and electrical connection work should be carried
out in accordance with all applicable National and Local Buil-
ding Code Regulations pertaining to the country of installation.
– All installation and electrical connection work must be carried
out by suitably qualifi ed professional person(s).
– If the fan is proposed to be installed in a system or environment
where a gas or other combustible heating appliances are present,
then it is the installers responsibility to ensure that suffi cient air
make-up is provided for the heating appliance to operate correctly.
– The fan should be connected to the electrical supply with co-
rrectly sized cables and should include a double pole switch
with a contact clearance of at least 3mm.
– All HCM fans are incorporate Class II (double) insulation. No
earth connection is therefore required.
– The HCM series of fans are designed to extract air up to and in-
cluding the maximum air temperature as detailed on the rating
label. Please check before installation.
6