Safety Notes; Operation And Maintenance; Placement Of Restube Automatic - Restube automatic Gebrauchsanweisung

1. Safety notes

Important notice to begin
Anyone who wishes to see these instructions on
video for more background information about
RESTUBE and the team may visit the following link: restube.com/automatic
Read the product information carefully before using the product!
Observe the notes inside the product and on the waist strap tag!
Check Restube before each use, see chapter 2.
Should you detect defects during inspection,
please contact the dealer/manufacturer.
Never attempt to repair Restube by yourself!
Restube...
... only works as a floating device when it is completely inflated.
... only guarantees functionality when using the original RESTUBE-CO2-Cartridge (16g / 21ml).
... is not suitable for temperatures below 4°C.
... only wear Restube on top of clothing, so that the trigger is accessible and the floating
device is not prevented from inflating!
... requires active use by the user and is therefore not suitable for people who are physi-
cally or mentally incapable of swimming.
... has a supporting function in water, but does not provide protection in case of uncon-
sciousness.
A slight trigger delay is possible in temperatures below 59°F (15°C). Carrying additional
weights or clothing reduces the perceived buoyancy of Restube.
Make sure that supervision is nearby. Only put yourself in situations with Restube that you
could handle safely without the product.
2. Operation and maintenance
Check the product's readiness for use (trigger and cartridge) before each use!
•
•

2.1 Placement of Restube automatic

Position or attach Restube so that it is easily reached / Attach it to your equipment or your drone.
16
>>> info@restube.com
NOTICE
Open the pocket and verify that the green securing clip is attached to
the side of the trigger mechanism.
>>> If the securing clip is missing, the CO2 cartridge may be
empty. In this case, unscrew the CO2 cartridge.
>>> If the cartridge is pierced at its opening, it is empty and
must be replaced.
Verify that the bladder is in the correct position in the pocket.
>>> The nut on the trigger mechanism must face the label
with the nut symbol sewn into the pocket.
>>> The release lever must not be obstructed