Connect IT M8 Benutzerhandbuch Seite 3

M8 AIR VENT MAGNETIC HOLDER
and does not hold the holder with the phone in the required position, try to use the
bottom edge of the ejector grille as a support.)
Use of the metal plate
Metal plate is suitable for use for phones in a protective case.
1. Remove the case from the phone.
2. Position the metal plate into the case.
3. Insert the phone back to the case.
4. Fix the phone on the magnetic holder.
Use of the self-adhesive 3M metal plate or metal plate with gel
Self-adhesive 3M metal plate and metal plate with gel are designed for direct installation
on the phone or e.g. the case.
1. Remove the covering foil from the self-adhesive plate.
2. Stick the plate to the suitable place on the phone or the case.
3. Fix the phone on the magnetic holder.
CI-658
USER MANUAL
EN