Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - Vorwerk Kobold PBB100 Gebrauchsanleitung

Vorschau ausblenden Andere Handbücher für Kobold PBB100:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
WARNING
Risk of fire or electric shock!
If incorrect repairs are performed on the device and the corresponding power
supply, this may cause fire or electric shock.
CAUTION
Risk of injury from moving parts!
Moving parts (such as the rotating brushes or oscillating cloth holder) could cause
injury.
Fault
The electric upholstery
brush will not operate.
The LED display on the
cordless vacuum cleaner
lights up yellow indicating
that the filter bag needs
changing, but the filter
bag is not full.
The bristles of the
upholstery brush are
deformed or matted.
38
7

Troubleshooting

Never attempt to repair the device yourself.
Repairs to electrical appliances may only be carried out by a Vorwerk
Customer Service Centre, a workshop authorised by Vorwerk or a person with
similar qualifications in order to avoid hazards.
Always switch the device off before all retrofitting, cleaning and maintenance
work.
Disconnect the accessory head from the device before performing retrofitting,
cleaning or maintenance work on the accessory head.
Stay clear of the moving parts.
Never reach into the rotating components.
If your device does not function properly, it could be due to one of
the following reasons:
Possible causes and rectification
The cordless vacuum cleaner is not switched on.
– Switch on the device.
There may be a fault on the cordless vacuum cleaner.
– Refer to the instruction manual for the cordless vacuum cleaner.
It is possible for the LED display on the cordless vacuum cleaner to light
up yellow even though the filter bag does not need changing,
particularly when vacuuming crevices with the electric upholstery
brush.
– Move the electric upholstery brush gently back and forth as you
vacuum. The LED display will change back to green.
Fringes or fabrics were sucked in and pulled out again.
– Replace the suction nozzle.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Kobold mp100Kobold mr100

Inhaltsverzeichnis