D) Attaching The Suction Hose; E) Extension Tubes, Combination Nozzle, Crevice Nozzle And Pond Brush - Basetech 2302702 Bedienungsanleitung

d) Attaching the suction hose

• The small stud and the arrow on the connection piece of the suction hose must be at the top when inserting.
• Insert the connection piece into the suction opening. Turn the connection piece to the left to lock in place.
• To remove the suction hose, turn the connection piece to the right. Pull the connection piece out of the suction
opening.

e) Extension tubes, combination nozzle, crevice nozzle and pond brush

• Connect the larger end of the first extension tube to the angled connecting piece of the suction hose.
• If required, insert up to three extension tubes into each other.
• Connect either the combination nozzle, crevice nozzle or pond brush tool with the extension tube.
• You can also directly attach the different nozzles to the angled connecting piece of the suction hose and use the
product without extension tubes.
• You can store unused tubes and suction nozzles on the accessory holders on the casters.
47.5 cm
27