B) Removing/Installing Motor Unit; C) Installing Casters - BASETech 2302702 Bedienungsanleitung

b) Removing/installing motor unit

• Push down the locking lever on both sides of the motor unit to unlock. Fold the locking lever up to secure in place.
• Remove the motor unit from the container.
• Remove all the accessories from the container.
• When reinstalling the motor unit, the latch points of the container must be aligned to the locking levers.

c) Installing casters

• With the motor unit removed, place the container
upside down.
• Insert the casters into the slots on the side of the
container.
• Secure each of the casters with a screw.
26
Latch point