Mounting The Plate To The Rotator; Mounting The Plate To The Felling Grapple - GMT C10 Betriebsanleitung

GMT C10

3.2 Mounting the plate to the rotator

The mounting plate for the rotator has the same pattern of holes as that of the flange of the rotator.
The male sections of the hydraulic links are attached to the underside of the rotator.

3.3 Mounting the plate to the felling grapple

The mounting plate has the same pattern of holes as that of the felling grapple.
The female sections of the hydraulic links are attached to the existing felling grapple hydraulic hoses.
Please note: Consult the user manual of the felling grapple for the correct marking of the hoses. It is
important to have the right hydraulic hose on the G.C. and G.O. connected to guarantee a correct
functioning of the felling grapple. Ensure that the plate is installed in such a way that the hose for
Grapple Close with the Label [G.C.] is located at the bump for the recess in the rotator plate.
Recess
20
Bump for
the recess