Instruction Manual; Safety Warnings - Makita DML815 Betriebsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
LED
Dimensions
(L x W x H)
Rated voltage
Net weight
Battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Some of the battery cartridges listed above may not be available depending on your region of residence.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Operating time
Battery cartridge
BL1430 / BL1430B
BL1460B
BL1830 / BL1830B
BL1860B
• The operating times in the above table are a rough
guideline. They may differ from actual operating times.
Symbols
The followings show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Indoor use only.
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic Equipment
and Batteries and Accumulators and Waste
Batteries and Accumulators and their implemen-
tation in accordance with national laws, electric
equipment and batteries and battery pack(s)
that have reached the end of their life must be
collected separately and returned to an environ-
mentally compatible recycling facility.
Battery protection system
The tool is equipped with the protection system, which
automatically cuts off the output power for long service life.
The light goes off during operation when the remaining bat-
tery capacity gets low. This is caused by the activation of
the protection system and does not show trouble. Remove
the battery cartridge from the tool and charge it.
Operating time
17 hours
35 hours
24.5 hours
54 hours
227 mm x 79 mm x 116 mm
BL1415N / BL1430 / BL1430B / BL1440 / BL1450 / BL1460B
BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /
BL1840B / BL1850 / BL1850B / BL1860B

SAFETY WARNINGS

IMPORTANT SAFETY INSTRUCTIONS
WARNING:
When using electric tools, basic
safety precautions should always be followed to
reduce the risk of fire, electric shock, and per-
sonal injury, including the following:
READ ALL INSTRUCTIONS.
Do not look into the light, or do not expose the
1.
light to eyes. Eyes may be damaged.
2. Do not cover or clog the lit tool with cloth or car-
ton, etc. Covering or clogging it may cause a flame.
3. The tool is not waterproof. Do not use it in
damp or wet locations. Do not expose it to rain
or snow. Do not wash it in water.
4. Do not touch the inside of the flashlight head
with tweezers, metal tools, etc.
5. Do not give the tool a shock by dropping,
striking, etc.
6. When the tool is not in use, always switch off
and remove the battery cartridge from the tool.
Battery tool use and care
7.
1. Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
2. Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
3. When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
3 ENGLISH
DML815
0.5 W x 4
D.C. 14.4/18 V
0.56 - 0.93 kg