Changing Unit Of Measurement; Setting The Thermometer - Rudolf Riester Ri-Thermo Sensiopro Bedienungsanleitung

CHANGING UNIT OF MEASUREMENT

This meter provides two measurement units used for indicating the
body temperature, °C or °F, for your preferred selection.
STEP 1. Press the to turn on the thermometer first.
STEP 2. Press the °C / °F button to select. Press the to begin the
measurement or keep the meter in idle for 30 seconds to automatically
turn it off.

SETTING THE THERMOMETER

You will need to set time for first-time use or after replacing the battery.
STEP 1. When the thermometer is off, press the MEM button for 2
seconds to enter the setting mode.
STEP 2. Set the date and time
• Press the MEM or °C / °F button to select the correct month.
• Press the to move on the next step.
• Press the MEM or °C / °F button to select the correct day / year / hour
/ minute.
EN-8