Charging; Charging Method; Charging Safety Tips - Modster M740 Betriebsanleitung

User Manual MODSTER M740

3. Charging

3.1 Charging method

Step 1: the charge position is on the side of the Scooter.(as shown in the pic-
ture)
Step 2: plug the charging cable into the charging hole.(make sure the
connection is dry)
Step 3: the indicator lamp of the charger is red when charging. When the
lamp changes green, battery is full, please stop charging when it is full, or it
will affect the battery life.
Step 4: finish the charge by covering up the charge port and avoiding the
water.

3.2 Charging safety tips

Charge at least 5 hours before the first operation.
To maximize the battery life, please charge once per month or after two days
of cycling. Please charge at the suitable temperature.
Not charge on time may cause battery damage. As time went by, the
battery power will be totally out ,It is not good for battery.
Please use the batteries, chargers and cables supplied by the original
manufacturer and prevent the battery from being overcharged.
Please ensure that the charger cables are connected correctly at ventilated
environment.
Please make sure you use it in a dry environment. Chargers or cables will
never be allowed to touch water because it could lead to electric shocks. Do
not touch with wet hands. If any failure occurs during charging, unplug im-
mediately.
Be sure to pull out of the plug and don't pull the plug from the cable.
Do not allow the charger or cable to contact the sharp or hot items.
Perform visual inspection of the charger and charger cables regularly.
If the charger cable has obvious damage. Do not use charger to avoid
further damage, please contact for replacement.
Please do not repair the battery, charger or cable independently.
Please contact us if there is any problem.
Never charge the battery unobserved!
www
7
www.modster.at