Processing; Inflate And Replace Internal Tire; Disc Maintenance - Modster M740 Betriebsanleitung

User Manual MODSTER M740

6.3 Processing

Battery and power equipment can not be discarded as general household
rubbish, you already make a significant contribution to the environmental through
ride Scooter, in order to avoid unnecessary pollution.
Please handle your electric Scooter and all relevant parts (batteries) through the
authorized processing facility.
Please follow the latest guidelines, if you have any questions, please consult the dis-
tributor or contact the after sales department.

6.4 Inflate and replace internal tire

When there is a low pressure in the tire, or the pressure of the two tires is different,
please inflate it in time. Make sure the pressure of the two tires is the same. The de-
fault Front tire pressure is 2.8 Bar, rear tire is 2.5 Bar.
If you need to change a tire because of tire burst, please contact the authorized
agent or after sales department for maintenance. (you can also go to the bicycle
repair shop.)
6.5 Disc brake maintenance
Insert M5 bend to the brake which was fixed screw on the frame, according to the
direction of the screw „tight" at right and "loose" at left, first turn to left gently, so
that the brake can be slightly loose.
Then left (right) hand brakes pinched, aims to keep the rear brake pads pinched
tightly.
Rightwards the M5 bend to brakes, until the brake fixed tightly. Then loosen the
brakes while it return to original position automatically. After that there will not
grinding if the brake pad in a suitable direction.
www
12
www.modster.at