Usb Connection; Other Connections; Magic Remote Functions - LG OLED55B7-Serie Handbuch

USB connection

Some USB Hubs may not work. If a USB device connected through a USB
Hub is not detected, connect it directly to the USB port on the TV.

Other connections

1
. @
Connect your TV to external devices. For the best picture and audio
4
quality, connect the external device and the TV with the HDMI cable.
ghi
Some separate cable is not provided.
7
pqrs
• General HDMI ULTRA HD Deep Colour :
LIST
- On : Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)
- Off : Support 4K @ 50/60 Hz 8 bit (4:2:0)
If the device connected to Input Port also supports ULTRA HD Deep
Colour, your picture may be clearer.
However, if the device doesn't support it, it may not work properly.
In that case, connect the device to a different HDMI port or change the /
RECENT
TV's HDMI ULTRA HD Deep Colour setting to Off.
• Supported HDMI Audio format :
DTS (44.1 kHz, 48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz, 44.1 kHz, 48 kHz),
BACK
PCM (32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz) EXIT
(Depending on model)
TEXT

Magic remote functions

When the message "Magic remote battery is low. Change the battery." is
displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA)
matching the and ends to the label inside the compartment,
and close the battery cover. Be sure to point the magic remote toward
the remote control sensor on the TV. To remove the batteries, perform
the installation actions in reverse.
It is recommended that an Access Point (AP) be located more than 0.2 m
away from the TV. If the AP is installed closer than 0.2 m the Magic remote
may not work properly due to frequency interference.
• Some buttons and services may not be provided depending on
models or regions.
(Depending on model)
STB
PWR
2
3
abc
def
5
6
jkl
mno
9
8
wxyz
tuv
0
/
STB
MENU
A
GUIDE
box to the universal remote control for your TV.
Number buttons Enters numbers.
Alphabet buttons Enters letters.
T.OPT
FOCUS
LIVE ZOOM
- Accesses the Universal Control Menu.
you edited while using apps or watching Live TV.
Network connection is required to use the voice recognition function.
1 Press the voice recognition button.
2 Speak when the voice display window appears on the TV screen.
other videos, or perform a web search by entering text in the search bar.
(POWER) Turns the TV on or off.
You can turn your set-top box on or off by adding the set-top
(Space) Opens an empty space on the screen keyboard.
Accesses the saved programmes list.
(Screen Remote) Displays the Screen Remote.
* You can use the application by selecting the number as
* Audio descriptions function will be enabled.
Adjusts the volume level.
Scrolls through the saved programmes.
(MUTE) Mutes all sounds.
(Voice recognition)
(SEARCH)* Search for content such as TV programmes, movies and
A
9