ASROCK Z590 PG Velocita Bedienungsanleitung Seite 13

4010 Cooling Fan Bracket
Before installing the cooling fan, please make sure that your motherboard is properly
installed into a PC case.
Installing the 4010 Cooling Fan Bracket
Step 1
Attach your 4010 fan to the bracket and secure it
with 4 screws.
*Please note that the 4010 fan does not come
with the package.
Step 2
Place the 4010 fan with bracket to your mother-
board with screw holes aligned. Secure it with 2
screws.
*Please note that the bracket may possibly
protrude over the motherboard due to the
position of other components. The bracket can
also interfere with the CPU heatsink. Please
adjust the bracket into the proper position before
fastening the screws.
Step 3
Connect the fan cable.
Z590 PG Velocita
9