Save Mode; Protective Device - SHX SHX20KV2002G Bedienungsanleitung

5. CHILD PROTECTION
The panel has a child lock. To set this, please proceed as follows:
SETTING DIRECTLY VIA THE CONTROL
PANEL
While the device is switched on, press and
hold the -button until the
appears on the display.
To deactivate the childproof lock, press and
hold the -button until the symbol on the
display goes out.
The SHX panel has an economy mode, which should help you save electricity!
As soon as the desired room temperature that you have set is reached, the device stops the
high temperature output - however the low temperature output remains active in order to
maintain the target temperature.
If the room temperature is 2 degrees above the set temperature, the device is
switched off. The panel is only activated when the temperature has dropped by 2
The SHX panel is equipped with a protective device that is designed to protect the
device as well as to prevent a fire.
Please note that the mechanism is not an auto stop or other comfort function.
Always switch off the device, pull out the mains plug and wait until the heater cools
down before you move, clean or store the device.
OVERHEATING PROTECTION
If there is any risk of overheating (e.g. cover of the device, mains overload), the built-in
overheating protection switches the device off.
As soon as the device cools down, the device automatically switches on and continues as
before.
-symbol
SAVE-MODE
degrees compared to the set target temperature.

PROTECTIVE DEVICE

Seite 29 von 34
REMOTE CONTROL SETTING
Press the -button to activate and
deactivate the child lock.
This -symbol appears on the display.
NOTE