Description Of The Device; Installation - SHX SHX20KV2002G Bedienungsanleitung

Panel
SAFETY INSTRUCTIONS FOR ASSEMBLY
The SHX heating panel can be mounted on walls or other vertical surfaces.
1. The SHX heating panel may only be installed with the wall mounting brackets supplied.
2. Make sure that the wall you mount the panel on can carry the weight of the panel.
3. To avoid overloading the circuit, do not connect the panel to a circuit to which other
devices are already connected.
4. Do not mount the heating panel directly under a wall socket, the strong heat
development takes place above the panel and the socket could be damaged.
5. Mount the panel 20-100cm above the floor.
6. Leave a space of at least 50cm to all sides of the device. Leave at least 1-2 meters to
all sides if there are solid or flammable objects.
7. Make sure that there is no material in the immediate surrounding of the heating panel
that can deform or discolour at a temperature above 100 °C.
8. In order not to impair the heating efficiency, do not position any furniture or other objects
in front of the heating panel.
9. Never install the cord behind the panel.
It is recommended that the assembly be carried out by two people, in order to avoid

DESCRIPTION OF THE DEVICE

INSTALLATION

damaging the SHX heating panel.
Seite 22 von 34
Display & Control Panel
Wall Mounting
Feet
NOTE