Inhaltsverzeichnis - RDS Technology SILACOUNT 200 Bedienungshandbuch

Silacount 200 Bale Wrap Monitor
Contents
1 Introduction
What can it do ? - 2
2 The control switches
3 Using the instrument
Current/Target Wraps display - 3
Manually reset Current Wraps to zero - 4
Programme Target Wraps - 4
Programme Early warning alarm - 5
Part and grand total - 5
Display totals - 5
Reset part total - 6
Total reset - 6
Introduction
The RDS Silacount 200 is used on a Bale Wrapper to count the number of
wraps of film applied to the bale. The total number of bales wrapped is
accumulated and stored in the instrument memory. It has an illuminated 4
digit LCD display, 3 switches to control all functions and an internal alarm.
An external alarm is optional. The instrument is normally powered on via the
vehicle ignition circuit.
What can it do ?
• Continuously displays the current number of wraps around the bale
alongside the desired number of wraps preset by the operator.
• Sounds an alarm at a preset number of wraps before the target number is
.
reached
• Automatically senses when the bale wrap sequence ends and records it to
each of two memory registers, a Grand Total and a Part Total.
2
2
3
3