Product Introduction - Kiano Elegance Robot Original Bedienungsanleitung

Product introduction

Keys on the machine
Instruction
On/Off
1. In case the main machine is being charged on the
charging stand, it will automatically turn on.
2.During its charging, the machine cannot be turned off.
3.Long press the power key, the power indication light will
light up and the machine turns on. Meanwhile, there will
be a voice prompt after completion of turning on.
4. In case the main machine is static, long press the
power key to turn it off.
Machine charging
Placement of the charging stand
Place the charging stand on a horizontal floor against the
wall and ensure enough space on both sides and the
front side of the charging stand. Connect the power
adapter to the charging stand and plug the power adapter
into the power outlet.
To ensure that the robot vacuum cleaner can be networked,
place the charging stand within the range covered by WiFi.
1. After cleaning, the machine will automatically return to
the charging stand for charging. If it cannot return to the
charging stand, try to remove the obstacles around the
charging stand or take the cleaner back to the charging
stand for charging.
2.During the cleaning, if the battery of the machine is
lower than 20%, it will automatically return to the charging
stand for charging. After the battery is fully charged, it will
automatically return to the breakpoint to continue clean-
ing.
Power key：
*Short press: Sweep/pause
*Long press: On/off the machine
Color of power indication light:
*White: Power ≥20%
*Red: Power ≤20%
*Breathing light flashing: Charging
*Red quick flashing: Faulty
WiFi indication light：
*Slow flash: Waiting for connection
*Normally on: WiFi is connected
*Quick flash: WiFi connection failed
Recharge key：
*Short press: recharge / pause
*Long press: Timing cleaning
3. If the machine is turned off automatically due to low
power, you can manually take it back to the charging
stand for charging. Make sure the charging electrode is in
good contact and check whether the charging indication
light is on.
4.After the machine is fully charged, please turn it off if it
doesn' t work. If the charging is kept for a long time,
which may damage the battery.
Connection network for the machine
Before connecting the network, please make sure that the
mobile phone and the machine are within the WiFi cover-
age and as close as possible to the router.
In case the router configuration or the password is
changed, or the mobile phone cannot be connected to the
device due to other reason s , reset the WiFi of the
machine for pairing.
Reset method:
After turning on the machine, press both the power key
and the recharge key simultaneously for 3 seconds until
you hear the voice prompt and the WiFi indication light
slowly flashes, which indicate that the WiFi reset is
successful.
Device pairing:
Open the APP to add device and operate by following
APP prompts.
Robot vacuum cleaner does not support 5G WiFi;
And it does not support WiFi with WEP encryption.
EN
9