Product Installation - Kiano Elegance Robot Original Bedienungsanleitung

EN
Machine and accessories
The following product and accessories will be found after opening the package, please check carefully.
（The following pictures are for your reference, and they are subject to the actual product received。）
Machine
Charging stand
High efficiency filter
Side brush
Power adapter
Instruction
*Cleaning brush
*Dust box
Water tank
Mop component
Single suction
port component
*The accessories are already installed on the machine.
The accessories are optional for the customer.

Product installation

1. Charging stand
Take the charging stand out from the package.
2. Place the charging stand against the wall
and connect the power supply
Please remove the plastic film on the silicone pad at the
bottom of the charging stand and place it against the wall
and stick it firmly.
Please make sure that no obstacles in the space of 1 m on
both sides and 2m ahead of the charging stand.
8
x1
x1
x1
x2
x1
x1
x1
x1
x1
x1
x1
Signal indication light
Power interface
Charging terminal
Machine Charging stand
Side brush Power adapter
Mop component
Water tank
3.Charge the robot vacuum cleaner on
the charging stand
During the charging of the robot vacuum cleaner on the
charging stand, it will automatically turn on.
4.Install the mobile client to bind the robot
vacuum cleaner
Please scan the QR code below to download and install the
mobile client. For details, please refer to the APP Operation
Guide.
05.Start cleaning
Short press the power key or use the APP to start the
cleaning task.
The cleaning cannot be started if the battery is too low. It is
recommended to fully charge before initial using. (If the
white indicator light for power is normally on, it indicates that
charging is complete.)
High efficiency filter
Instruction
Single suction
port component
Color of power indication light
*White: Power ≥20%
*Red: Power ≤20%
*Breathing light flashing: Charging
*Red quick flashing: Faulty