i-tec Advance Serie Benutzerhandbuch Seite 4

i-tec USB 3.0 Docking Station Mini
Important!
We strongly recommend you to check and update USB 3.0 drivers and firmware of your
computer before Docking station Mini installation. You can encounter problems with installa-
tion or usage if your computer uses old drivers for USB interface. Installation for USB Hub ( 3x
USB 3.0 ports type A) is automatic and all driverless. This HUB will be detected automatically
after the docking station is connected to your USB port of your computer. Ethernet adapter
requires driver installation. You can install the driver from CD or you can download latest driver
from www.i-tec-europe.eu You should install driver first before you connect the docking station
to your computer.
INTRODUCTION
Thank you for purchasing " i-tec USB 3.0 Docking station Mini". This product lets you easily
extend your laptop with another useful devices like keyboard, mouse, Ethernet adapter, USB
display adapter for monitor, external HDD case etc. You can connect all mentioned devices to
your laptop just with single USB cable then. If you want this docking station solves monitor
connection as well you need to buy i-tec USB Display Adapter as recommended accessory.
This adapter you just connect to free USB port on the docking station mini.
See picture for possible use:
EN
04