Product Registration - Nash Siren R3 Bedienungsanleitung

2020 SIREN R3 USER MANUAL 25.02.20.indd 2

PRODUCT REGISTRATION

Registering your R3 alarm or Receiver with Nash Tackle
extends its warranty period to 2 years. Your alarm will have a
unique 7 character code both on the box and inside the battery
compartment. You will need this serial number to register your
alarm.
Register your R3 alarm or Receiver at:
www.register.nashtackle.co.uk
R3 HEAD
Insert Battery: Open battery compartment using crosshead
screwdriver and insert 1 x CR2 3V battery (not supplied).
To Turn R3 Head On/Off:
seconds. When the R3 is turned on you will hear a sequence
of bleeps of increasing pitch and the LEDs will illuminate
momentarily. When turned off the series of bleeps are of
decreasing pitch and no LEDs light.
Muting: Short press of the Power button. When the R3 is muted
the left hand LED will illuminate momentarily and the R3 will
bleep once. When volume is restored the left hand LED will
flash and the R3 will bleep once.
Volume: Short press of the X button. Four volume settings
available. Each consecutive short press of the X button changes
Volume output by one level. The bleep you hear represents the
volume being set.
Sensitivity
The R3 has 3 sensitivity settings. Sensitivity is changed by long
pressing the X Button.
3 bleeps:
Traditional roller wheel/magnet indication. This is the
R3's default setting out the box.
2 bleeps: Speed Sensing High Sensitivity. Eliminates false
indications from wind, weed and undertow.
P2
Press and hold Power button for 2
2 YEAR*
SIREN R3 USER MANUAL
13/07/2020 08:41