Incoming Goods Inspection; Intended Use - janitza AKM 806 Benutzerhandbuch

www.janitza.de
3.2

Incoming goods inspection

Safe and trouble-free operation of this product and
its components presupposes proper transport,
proper storage, set-up and assembly as well as
operation and maintenance in addition to com-
pliance with the safety information and warning
notices.
Exercise due caution when unpacking and packing
the device, do not use force and only use suitable
tools.
Before mounting and installing the product, please
check
· Its flawless mechanical condition by visual in-
spection.
· The scope of delivery for completeness.
If it can be assumed that safe operation of the
product is no longer possible:
· Disconnect the product from operation immedia-
tely!
· Secure the product against being switched on
again!
It can be assumed that safe operation is no longer
possible, for example, if the device:
· Has visible damage.
· No longer functions despite an intact power
supply.
· Was subjected to extended periods of unfavor-
able conditions (e.g. storage outside of the per-
missible climate thresholds without adjustment to
the room climate, condensation, etc.) or transport
stress (e.g. falling from an elevated position, even
without visible external damage, etc.).
CAUTION
Malfunction, damage or risk of injury due to
improper connection of the device and its com-
ponents.
Improperly connected devices can deliver incorrect
measured values, damage the device or pose a risk
of injury to persons.
Observe all
· usage information on the device and its com-
ponents!
· Switch off your installation before commen-
cing work! Secure it against being switched
on! Check to be sure it is de-energized!
Ground and short circuit! Cover or block off
adjacent live parts!
3.3

Intended use

The busbar tap-off unit together with the BD2 bus-
bar trunking system is:
· Intended for installation in office buildings and
industrial plants.
· Plannable, for efficient and flexible energy dis-
tribution within building complexes.
· Not intended for installation in vehicles! Use of
the product in non-stationary equipment consti-
tutes an exceptional environmental condition and
is only permissible by special agreement.
· Not intended for installation in environments with
harmful oils, acids, gases, vapors, dusts, radia-
tion, etc.
· Not to be exposed to direct sunlight and inadmis-
sible climatic conditions, such as rain.
Safe and trouble-free operation of the product
requires proper transport, storage, assembly, ins-
tallation, operation and maintenance.
Busbar tap-off unit
57