Mounting Instructions - Carrier WTC-IS Installationsanleitung

Mounting instructions

Figure 3: Connecting WTC infrared receiver with the fan coil unit
Figure 4: Removing WTC infrared receiver cover
WIRING
The infrared receiver can be freely
■
combined in a daisy chain configuration
(Subnet Adapter is required to establish
a pass-through connection).
Cable length between the infrared
■
receiver and the fan coil should not
exceed 30 m.
When connecting cables, RJ45 female to
■
RJ45 female coupler shall be used.
30 m max.
15 m
Figure 5: Mounting WTC infrared receiver on
the wall
3