Configuration; Test Mode - Gewiss Chorus GW 90 770 Anleitung

CONFIGURATION

Select the wind sensor
To use the GW90769 wind sensor, turn the switch d to position II (default setting).
Selecting the test mode/setting the threshold
According to its position, the rotating switch e can be used to:
• Select the wind speed threshold
• Start the test mode
The rotating switch has 10 different positions (1, 2, 3, ... 9, 0).

Test Mode

Positions 1 and 2 start the test mode: after max 1 second, the front LED f will light
up. Rotate the anemometer and LED f will light up at the same frequency as the
rotation of the anemometer.
The device functions can also be tested at low rotation speeds.
12