Samsung HT-D5000WXZF Handbuch Seite 58

Network Services
Register Service Account
If you have existing accounts with any of the
providers listed by the Register Service Account
function, you can associate the provider account
and the provider account password with your
Smart TV Account. If you associate the account,
you will be able to log onto the account through
Smart Hub easily, without entering your account
name or password.
To use the Register Service Account function,
follow these steps:
1. In the Settings menu, select Register Service
Account, and then press the ENTER button.
The Register Service Account Window
appears.
2. Press the ▲▼ arrow buttons to select a
Service Provider you want to associate with
your Smart TV Account, and then press the
ENTER button.
✎
NOTE

If you have a Samsung account and you want
to use the Samsung Apps function in Smart
Hub, you must register your Samsung Apps
account here. See page 61 for more
information.
3. Using your remote and the on-screen
Keypad, enter your site ID and password.
When done, press the ENTER button.
✎
NOTE

This is the ID and password you normally use
to access your account on this site.
4. If you have entered the ID and password
correctly, the Registered Successfully
message appears.
5. If you pressed ENTER, repeat Steps 2
through 4 to associate another Service
Provider.
6. When you are done, press the RETURN
button.
58
English
HT-D4500_ELS_1223.indd 58 HT-D4500_ELS_1223.indd 58
Change Password
The Change Password function lets you change
your Smart Hub password. To change the
password, follow these steps:
1. Select Change Password, and then press
the ENTER button.
2. Enter your current password. The next
screen appears.
3. On the next screen, enter a new password
on the fi rst line. Enter it again on the second
line to confi rm.
4. The Changing Password Complete message
screen appears. Press the ENTER button or
wait for the screen to close - about 5
seconds.
Remove from TV Account List
The Remove from TV Account List function
cancels all your current registered Service
Accounts that you registered on the Register
Service Account screen.
Deactivate Account
The Deactivate Account function deactivates your
Smart TV Account and deletes it and all your
account settings entirely from Smart Hub.
Service Manager
This menu is for setting the service of the special
application. (Application-related is like AP
New,Ticker etc.)
✎
NOTE

This function operates only when special
application is installed.
Reset
The Reset function initializes all downloaded
application, erases all user accounts and settings
from the product, and resets all Smart Hub
settings to the factory default settings. It then
restarts Smart Hub as if it were starting for the
fi rst time. Your account, however, remains on the
Smart Hub server. To log into your account, enter
your ID and password on the Create Account
screen.
2011-12-23 2011-12-23 3:59:48 3:59:48