Operation - Klarstein VINAMOUR 54D 10030714 Bedienungsanleitung

EN
20

OPERATION

Control Panel and Buttons
Light button: To turn the inner light on or off.
Power button: To control the appliance on or off.
Plus button: Used to increase the set temperature by 1 °C or 1 °F
Minus button: Used to lower the set temperature by 1 °C or 1 °F
SET: Set or view the internal temperature setting for each zone.
Selector Display
Switching display temperatures in Celsius or Fahrenheit. To choose one of these displays
press the button for 5 seconds.
Select the Temperature
Your wine cellar has one single compartment. The temperature can be chosen between
5°C and 18°C (40° and 65°F).
Before switching on
• Make sure that it has been installed by a suitably qualified person, as per the
information contained in the installation instructions.
• After delivery, wait for 24 hours before connecting the appliance to your mains
supply. This will allow any refrigerant gasses that may have been disturbed during
the transportation process to settle.
• The outside of the appliance and the removable accessories contained within it,
should be cleaned with a solution of liquid detergent and water.
• The interior of the appliance should be cleaned with a solution of sodium
bicarbonate dissolved in lukewarm water. The interior and accessories should be
thoroughly dried, after the cleaning process has been completed.
• There can be an odour when you first switch on the appliance. It will lessen as the
appliance starts to cool.