ROSIERES RBLP230 Bedienungsanleitung Seite 8

GB
furniture door and mark the holes as
indicated in the figure remove the
squares and drill holes with 2 mm
at 8 mm from the outer edge of the
door . Place the small square on the
guide again and fix it with the screws
supplied.
9. Should the lining up of the
furniture door be necessary , use the
clearance of slots .At the end of
operations, it is necessary to check
the door of the furniture closes
properly.
10. Fix cover (D) on guide (B) until it
clips into place.
7