Remove Transport Packaging; Installation; Building In - Rosieres Rblp230 Bedienungsanleitung

carried out by inexperienced persons may cause injury or serious malfunctioning.

Remove transport packaging

The appliance and the interior fittings are protected for transportation. Pull off the
adhesive tape on the left and right side of the door. You can remove any remnants of
adhesive using white spirit. Remove all adhesive tape and packing pieces from the
interior of the appliance.

Installation

Installation Location
Before installing, carefully read the instruction in the end in order to avoid a
certain number of problems.
Warning: to avoid a hazard due to instability of the appliance, it must be fixed
according to the instructions:

Building in

Dimensions of the recess
Height of housing mm 1225
Depth of housing mm 550
Width of housing mm 560
It is necessary that the cabinet has a
ventilation recess with the following
dimensions :
Depth 50mm
Width 540 mm
For appropriate venting, follow
indications in the figure.
1. Push the appliance into the
housing until stop strip (A)
touches the kitchen unit.
2.Press in the joint covers between
the appliance and the kitchen
5
GB