Hama TC220 Bedienungsanleitung Seite 5

Alarm time setting
• At the state of time and backlight switch is in"OFF"position, press "M" three
times, then press "S" key for ALARM ON/OFF.
• At the state of time and backlight in "OFF" position, press "M" three times, then
press "S" for 3 seconds into alarm setting. Press "S" to set the alarm hour,
minute, turn on and turn off function. Press
• If there is a symbol of " " display , then the alarm is turned on . It reaches the
set alarm time, 60 seconds of music is going. No the symbol of "
is turned off.
• At the normal of state, press or
will last 60 seconds. When reaching the alarm time, the alarm sound is arising
and the clock back light is changing 7 colors according to the alarm sound until
the alarm time is end.
Count-down time setting
• At the state of time and backlight switch is in "OFF"position, press "M" for four
times, then press "S" for 3 seconds into the count-down time setting state.
• Press "S" to set the count-down time, minute, second, on or pause by turn.
Press or to adjust the blinking part.
• The "TIMER" is blinking, the count-down time function is on. If no blinking of
the "TIMER", then the count-down time function is paused.
• Press 'S' to start count-down function.
• When the counting time , press "S" to pause the count-down time. Press "S"
again to re-start.When the count down time is paused , press " " to return
the former set time. Press " " the former setted time will reach zero.( the
max forcount-down time is 180 minutes and 59 seconds ; the min is 1 second)
You will be reminded when the count-down time reaches zero. The regular
sound is "BEEP" and the alarm time is 60 seconds, blinking the symbol of the
count-down time , the alarm is end and the symbol is disappearing .
Temperature inquiry
At the state of time and backlight switch is in "OFF"position, press "M" one time
into temperature display state and the temperature inquiry will be ok. Press "S"
for °C & °F selection.
10
00092628bda.indd 10-11 00092628bda.indd 10-11
or to adjust the blinking part.
", the alarm
to choose the alarm sound and the sound
Sound enjoyment
At the normal display state, press or
Display control
When the "Return to time" switch is placed at the position of "ON", at any state
and no any operation in 10 seconds, it displays time automatically, and when the
switch is at the position of "OFF" the display will keep the last state all the time.
Attentions
1. If there are any phenomena of low alarm sound, paucity, blurry time display no
color light or dark light , please replace new batteries.
2. The color light is for short time enjoyment , not turn on the color light for long
time.
3. At any abnormal phenomenon, please press "RESET" to turn it on again.
Re-set the time and alarm after batteries replaced.
4. At any abnormal state, please get the professional help or contact our
company.
to enjoy 8 groups of world famous music.
07.07.2009 13:27:03 Uhr 07.07.2009 13:27:03 Uhr
11