Samsung HW-A450 Bedienungsanleitung Seite 4

Manually connecting the Subwoofer
   
; ; ;

Subwoofer
;
Red and Blue is On
연결
연결

Remote
Control
5 Sec
사운드
사운드
모드
모드

Soundbar
음량 우퍼레벨
음량 우퍼레벨
SOUNDBAR
SOUNDBAR
The LINK LED indicator stops blinking and

Connection
glows a solid blue (connection complete).
complete
NOTES
• If you use a device that uses the same frequency (5.8GHz) as
the Soundbar near the Soundbar, interference may cause some
sound interruption.
• The maximum transmission distance of the main unit's wireless
signal is about 10 m, but may vary depending on your operating
environment.
04 CONNECTING WITH A
HDMI OUT HDMI 출력
CABLE
HDMI IN HDMI 입력
(ARC) (ARC)
OPTICAL OUT OPTICAL 출력
TV / BD / DVD
Bottom of the
player / Set-top
Soundbar
box / Game
console
NOTE
• When you use an optical cable and the terminals have covers, be
sure to remove the covers.
English - 4
; ;
5 Sec
Blinking
blue fast
First, press the button on the
remote control to turn on the
display, and then press the Up
button on the remote control
for at least 5 seconds.
ID SET
Optical Cable
DIGITAL AUDIO IN
(OPTICAL)
D.IN
USB (5V 0.5A)
mode
DIGITAL AUDIO IN
(OPTICAL)
USB (5V 0.5A)
05 CONNECTING WIRELESSLY
Connecting a TV or Bluetooth Device via
Bluetooth
OR
What is the difference between BT READY and BT
PAIRING?
• BT READY : In this mode, you can search for previously
connected TVs or connect a previously connected mobile device
to the Soundbar.
• BT PAIRING : In this mode, you can connect a new device to
the Soundbar. (Press the
or press and hold the
Soundbar for more than 5 seconds while the Soundbar is in "BT"
mode.)
NOTE
• If asked for a PIN code when connecting a Bluetooth device,
enter <0000>.
POWER
POWER
Top of the Soundbar
5 Sec
BT PAIRING
OR
PAIR button on the remote control
(Source) button on the top of the
0
Be
So
•
So
•
•
•
In
•
•
So
•
•
•
•
Su
•
So
•
•
So
•
•
•
So
•