Cleaning And Maintenance - venton SV-170 Benutzeranleitung

Set Oscillation (Fig 3)
Set oscillation by pulling and depressing oscillation knob on the motor
cover.
Pull up: Stop Oscillation
Depress: Oscillation
Fan Tilt
Adjust fan tilt angle by gently pushing upwards or downwards.
Ensure that fan is switched off before adjustment.
During long periods of inactivity, disconnect the plug from the mains
socket.

CLEANING AND MAINTENANCE

Warning: before carrying out the normal cleaning operations, remove the
plug from the mains socket.
•
To clean the appliance, use a soft, slightly damp cloth; do not use
abrasive or corrosive products.
•
Do not immerse any part of the fan in water or any other liquid: if
this happens, do not immerse your hand in the liquid and, first of all,
remove the plug from the mains socket. Dry the appliance carefully
and check that all the electrical parts are not wet: if in doubt,
contact a qualified technician.
•
It is essential to keep the ventilation holes of the motor free of dust
and fluff.
•
In case of long periods of non-use store the fan, protecting it from
dust and moisture; we recommend using the original packaging.
•
If you decide to stop using the appliance, it is advisable to render it
in operational by cutting the power cable (ensuring first that the
plug has been disconnected from the mains socket) and making
sure that parts that could be dangerous in the hands of children
(e.g. the blade) can cause no harm.
17