Petra electric EA 10 Gebrauchsanweisung Seite 7

ately be removed with a special cleansing agent for stainless steel.
For removing lime residues add some vinegar concentrate (diluted 1:1) on
the heating bowl for a certain period. Then rinse thouroughly.
Wipe clean the outside of the appliance with a damp cloth only.
For UK use only
• This product is supplied with a 13 A plug conforming to BS 1363 fitted to
the mains lead. If the plug is unsuitable for your socket outlets or needs
to be replaced, please note the following. If the plug is a non-rewireable
one, cut it from the mains lead and immediately dispose of it. Never
insert it into a socket outlet as there is a very great risk of an electric
shock.
• The replacement of the plug at the mains lead has to be done according
to the following instructions:
Important: The wires in this mains lead are coloured in accordance with
the following code:
blue:
brown:
As the colours of the wires in the mains lead of this appliance may not
correspond with the coloured markings identifying the terminals in your
plug, proceed as follows:
- the wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black,
- the wire which is coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
Do not connect any wire to the terminal which is marked with the letter E
or by the symbol
• If a 13 A (BS 1363) plug is used it must be fitted with a 3 A fuse con-
forming to BS 1362 and be ASTA approved. If any other type of plug is
used, the appliance must be proctected by a 5 A fuse either in the plug
or adapter or at the distribution board. If in doubt - consult a qualified
electrician.
Never use the plug without closing the fuse cover.
The appliance complies
with the EEC regulations
no. 73/23 EWG and no. 89/336 EWG.
Subject to technical changes.
Proper dispose of the packaging material.
Neutral
Live
, or coloured green or green and yellow.
7