Panasonic EY47A1 Bedienungsanleitung Seite 13

16) Do not use blades which do not
comply with the characteristics
specified in these instructions.
17) Remove the battery pack from the
tool body before replacement of the
blade, making adjustments, or other
maintenance work.
18) Wear ear protectors when using the
tool for extended periods.
19) During charging, the charger may
become slightly warm. This is
normal. Do NOT charge the battery
for a long period.
20) Do not store the tool and battery
pack in locations where the
temperature may reach or exceed
50°C (122°F) (such as a metal tool
shed, or a car in the summer),
which can lead to deterioration of
the storage battery.
21) The ambient temperature range is
between 0°C (32°F) and 40°C
(104°F).
IV. SAFETY
INSTRUCTIONS
FOR RECIPRO-
CATING SAWS
1) Hold the power tool by insulated
gripping surfaces, when
performing an operation where
the cutting accessory may
contact hidden wiring.
Cutting accessory contacting a
"live" wire may make exposed metal
parts of the power tool "live" and
could give the operator an electric
shock.
Use clamps or another practical
2)
way to secure and support the
workpiece to a stable platform.
Holding the workpiece by hand or
against your body leaves it unstable
and may lead to loss of control.
WARNING
• Do not use other than the Panasonic
battery packs that are designed for
use with this rechargeable tool.
• Panasonic is not responsible for any
damage or accident caused by the
use of recycled or counterfeit battery
pack.
• Do not dispose of the battery pack in
a fire, or expose it to excessive heat.
• Do not allow metal objects to touch
the battery pack terminals.
• Do not carry or store the battery pack
in the same container as nails or
similar metal objects.
• Do not charge the battery pack in a
high-temperature location, such as
next to a fire or in direct sunlight.
Otherwise, the battery may overheat,
catch fire, or explode.
• After removing the battery pack from
the tool or the charger, always
reattach the pack cover. Otherwise,
the battery contacts could be
shorted, leading to a risk of fire.
• When the Battery Pack Has
Deteriorated, Replace It with a New
One. Continued use of a damaged
battery pack may result in heat
generation, ignition or battery
rupture.
• To prevent leakage, overheating,
smoke generation, fire, and rupturing
from occurring, follow these
instructions when handling our
rechargeable power tools (tool main
body/battery pack/charger).
- Do not allow material cuttings or
dust to fall onto the battery pack.
- Before storing, remove any material
cuttings and dust from the battery
pack, fit red plastic "terminal cover",
then place separately from metal
objects (screws, nails, etc.) in tool
case. Damage caused by loose
objects in the case will not be
covered by warranty.
– 13 –
EN