Installation Instructions - Gastrodomus LA25R-W Handbuch Zur Installation, Bedienung Und Wartung

GENERAL INSTRUCTION
Read carefully the instructions given in this booklet. Before connecting the appliance make sure that the data
shown on the technical plate (Fig.1), corresponds with that of the mains power supply. Before carrying out
any operation, insulate the appliance from the mains power supply. The installation must he carried out by
professionally trained personnel in accordance with the instructions of the manufacturer and current
regulations.
The Manufacturer declines all responsability for:
 any damage resulting from ignoring the instructions for installation and use or from irregular use of
the appliance;
 any inaccuracies contained in this booklet due to copying or printing errors.
The Manufacturer reserves the right to make alterations thought useful to the product, without changing its
basic characteristincs.
THECNICAL DATA
Model Material
LA25R Alluminium
LA25W Alluminium
LR25R Copper
LR25W Copper
LC25R Copper chromed
LC25W Copper chromed
LV25R Alluminium
LV25W Alluminium
NA25R Alluminium
NA25W Alluminium
NR25R Copper
NR25W Copper
NC25R Copper chromed
NC25W Copper chromed
NT25R
NT25W
LT25R Copper chromed
LT25W Copper chromed

INSTALLATION INSTRUCTIONS

1. The identifying and technical plate is fixed near the electrical connection of the appliance.
2. ELECTRICAL SAFETY RULES
Please observe these essential rules:
the mains voltage and that on the technical plate must be the same;

 connection must be to a regulation earthed socket;
connection must be to an equipotential system.

3. ELECTRICAL CONNECTIONS: must be carried out by trained personnel in accordance with electrical
norms. The power cable must be positioned so that no part of it reaches a temperature by 50°C. Before
installation make sure that the socket or switch used can be easily reached when the apliance is in place.
CAUTION: PRODUCER DECLINE ALL RFSPONSABILITY IF THESE SAFETY RULES ARE NOT
OBSERVED.
INSTRUCTION FOR USE
1. The appliance is intended for collective use and must be used by properly trained personnel.
2. Before switching on the machine for the first time, thoroughly clean off the industrial oils.
Color lamp
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
WHITE
Brass
Brass WHITE
WHITE
Dimensions
mm
RED
RED
Ø 225
RED
RED
Ø 190
RED
RED
Ø 225
RED
RED
RED
Ø 175
4
Power Power supply
W
230V/1N/
250
50-60Hz