Vitek VT-3796 Betriebsanweisung Seite 22

3796new1.qxd 4/1/05
ENGLISH
4. Record voice data using the microphone (MIC) on the main unit.
5. PRESS STOP TO END VOICE DATA RECORDING
Notes
Recording files are saved with names like VORC001.MP3, VORC002.MP3,
VORC003.MP3....and so forth.
If the "FULL!!!" symbol appears on the display, delete some files in order to create
more recording time on the player.
Enter the "Voice" mode in order to play back recorded files.
Recording from auxiliary devices
1. Set the line in data transfer speed in bits.
2. Choose the record mode by pressing and holding the function selector (F) button
for more than one second. The player will then be ready to record from an auxiliary
device.
3. Connect a line audio cable from the line out on the auxiliary audio device to the line
in jack on the player.
4. Press the (
iliary device. Recording of data from the auxiliary device will begin.
5. Press the Play ( ) button to pause recording. To stop recording, press the Record
( REC) button; line in recording will end.
5:56 PM
REC) button momentarily in idle mode and start playback on the aux-
18
Page 18