Display Of Information; Safety Instructions; Symbols; Designations - Bosch Rexroth PSG 6180 RSTK Serie Typspezifische Anleitung

26/44 Bosch Rexroth AG
Regarding this Documentation
1.3

Display of information

In order to enable you to work with your product in a fast and safe way, uniform
Safety instructions, symbols, terms and abbreviations are used. For a better
understanding they are explained in the following sections.
1.3.1

Safety instructions

For the safety instructions refer to Tab. 1: Required and supplementary
documentation Rexroth PSG xxxx MF-Welding Transformers Instructions and
Rexroth PSG xxxx MF-Welding Transformers Safety and user information.
1.3.2

Symbols

The following symbols mark notes that are not safety-relevant but increase the
understanding of the documentation.
Meaning of the Symbols
Tab. 2:
Symbol Meaning
If this information is disregarded, the product cannot be
used and or operated to the optimum extent.
Single, independent step

1. Numbered step:
2. The numbers specify that the Steps are completed one
after the other.
3.
1.3.3

Designations

This documentation uses the following designations:
Designations
Tab. 3:
Designation Meaning
BOS 6000 Bedienoberfläche Schweißen (Welding Software)
PSG xxxx
Medium-Frequency Welding Transformer 1000 Hz
RSTK
Sensor connector (primary connector type Robifix), temperature
switch, front–side secondary termination
1.3.4

Abbrevations

For the abbreviations used in this documentation refer to Tab. 1: Required and
supplementary documentation Rexroth PSG xxxx MF-Welding Transformers
Instructions.
R911337513 | PSG 6180.xx RSTK