Cleaning And Maintenance; Cleaning The Pre-Filter - TaoTronics TT-AP003 Benutzerhandbuch

Cleaning and Maintenance

Important: Always make sure the air purifier is turned off and unplugged before cleaning.
Cleaning the Air Purifier Body
Outer Surface
Wipe with a soft, dry cloth. If necessary, wipe with a damp cloth, then
immediately dry.
Air Inlet Grill
Open air inlet grill, vacuum up dust with a vacuum cleaner or wipe it with a cloth.
Air Outlet Grill
Remove air outlet grill, vacuum up dust with a vacuum cleaner or wipe it with a cloth.
Note:
• DO NOT stick any foreign objects or your fingers inside of the unit.
• Never immerse the air purifier in water and never allow water to drip into the motor
housing.
• For storage, you may leave the unit covered to protect it from dust. Store it in a cool,
dry location.
08
Cleaning and Maintenance

Cleaning the Pre-Filter

1
Unplug the air purifier. Take out the
Pre-Filter.
3
For heavy dust, soak with diluted common
kitchen detergents for 10 minutes, and
then clean.
5
Install the Pre-Filter and air inlet grill back.
Note:
• It is recommended to clean the Pre-Filter at least once every two weeks. More frequent
cleaning may be required depending on frequency of use and air quality.
• DO NOT clean with abrasive chemicals or flammable cleaning agents.
2
Vacuum the dust or wipe it with a cloth.
4
Dry the Pre-Filter.
09