Replacing The Hepa Filter - TaoTronics TT-AP003 Benutzerhandbuch

Using Your Air Purifier
Sleep Mode
Tap to activate Sleep Mode.
When Sleep Mode is enabled, the air purifier will run quietly under lowest possible fan speed,
making it ideal for use while sleeping.
Fan Speed Control
Tap repeatedly to cycle through the adjustable fan speeds: 1, 2, and 3 (Low, Medium, and High).
When adjusting the fan speed under Auto or Sleep Mode, the Auto or Sleep Mode will be
exited automatically.
Auto OFF Timer
Indicator ON
Tap repeatedly to select the desired auto off time (1, 2, 4 or 8 hours).
When time reaches zero, the air purifier will go into standby mode.
To cancel, tap repeatedly to select 0 hour.
Child Lock
Indicator ON
Press and hold for 3 seconds to turn on or off the Lock function.
06
Indicator ON
1
the HEPA Filter.
3
Replace with a new one. Install the filters
and air inlet grill back.
5
Press and hold
HEPA Filter.
Note:
• Important: Always make sure the air purifier is turned off and unplugged before
replacing the filter.
• It is recommended to replace the HEPA filter every 6 to 8 months (depending on the
frequency of use and air quality).

Replacing the HEPA Filter

Indicator ON
2
will light up as a reminder to change
4
for 3 seconds to reset the
Unplug the air purifier. Remove the old
HEPA Filter and properly dispose of it.
Plug in and tap to turn on the air purifier.
07