Werbung
General remarks / Troubleshooting
Battery:
1 lithium type 2032, 3V. Change batteries after appr. 3 years
or as soon as the display fades. Open the battery
compartment cover with a coin.
Changing batteries:
• Before changing take note of wheel size (WS) and
(total distance).
• Observe plus and minus. When battery compartment is
open, you should see the plus pole!
• Refit rubber seal if detached.
• After change of batteries (total distance), wheel size
(WS) and (clock) must be re-entered. kmh/mph is
shown as first value on the display.
We are liable for damages in accordance with the statutory
regulations in respect to our contractual partners.
KMH no display
• Old handlebar holder with radio transfer (RDS) used?
• Casing pushed over magnet (cf. Fig. 9)?
• Computer correctly slotted into holder?
• Cable checked for breaks?
• Contacts checked for oxidation/corrosion?
• Distance between magnet and sensor (max. 5 mm)
• Checked whether magnet is magnetised?
No display (screen blank)
• Check battery
• Battery inserted correctly (plus and minus)
• Battery contact ok? (bend carefully!)
KMH wrong display
• 2 magnets installed?
• Magnet positioned correctly?
• Wheel size set wrongly?
Display black/changes slowly
• Temperature too high (>60°C) or too low (<0°C)
35 |
Werbung
