Faller 163701 Bedienungsanleitung Seite 106

Converting the vehicle
On the universal PCB detach both outgoing cables of the motor.
X
Leave unchanged both cables on the side that leads in the motor. Do
not damage both connecting cables of the motor.
Fig. 25: Lorry model with universal PCB, soldered batteries, without wiring
Using a side cutter interrupt the connection to the dry-reed sensor
X
while taking care to leave the wire length as long as possible, see
EN
Fig.
Fig. 26: Separating the dry-reed sensor
Using a modeller's knife cut, on the upper side of the universal PCB,
X
five of the strip conductors in accordance with
106
26.
Fig. 27.