Operating Instructions; Automatic Switch-Off - AEG HE634400XB Benutzerinformation

22

Operating instructions

Display
-
+ digit
/ /
OptiHeat Control (3 step Residual heat indicator)
WARNING!
\ \
OptiHeat Control indicates the level of the residual heat. The induction cooking zones make
the heat necessary for cooking directly in the bottom of the cookware. The glass ceramic is
heated by the heat of the cookware.
OPERATING INSTRUCTIONS
You operate the hob with the knobs of the oven and control panel of the hob. The Op-
erating Instructions chapter for the oven tells how to operate the knobs.
When a cooking zone operates, it hums for a short time. This is typical of all ceramic glass
cooking zones and does not show that the appliance operates incorrectly.
Automatic Switch Off
The function stops the hob automatically if:
• all cooking zones are off (
• you do not set the heat setting in less than 10 seconds after you start the hob.
• there is an object (a pan, a cloth, etc.) on the sensor field for longer than 10 seconds. The
sound operates until you remove the object.
• the hob gets too hot (e.g. when a saucepan boils dry). Before you use the hob again, the
cooking zone must be cool.
• you use incorrect cookware.
zone stops automatically.
• you do not stop a cooking zone or change the heat setting. After some time
and the hob stops. See the table.
The cooking zone operates
Keep Warm
The automatic heat-up function is on
Power function
There is a malfunction
OptiHeat Control (3 step Residual heat indicator): still cooking / keep
warm / residual heat
Lock/Child safety function is on
Cookware unsuitable or too small or no cookware on the heating zone
The automatic switch off is on
Risk of burns from residual heat!
).
Description
comes on in the display and after 2 minutes the cooking
comes on